Technical specification
Turnkey means that the house is completed inside, outside and all connections are made. The house is ready to move into.
- Tin roof (click roof)
- Bear batten 25x100 mm
- Fan 28x45mm (air gap) cc 600
- Windbreak cloth
- Roof trusses 45x195mm cc400
- Mineral wool insulation 195mm
- Diffusion barrier
- Nail batten 28×45 mm cc 400
- Inner panel 15 mm
The load-bearing parts of the houses are designed for snow zone 2.5 kN/m2. Houses for snow zones 3-5.5 can be offered at an additional cost.
- Standing panel 22 mm
- Nail batten 28×45 mm
- Ventilation batten 28×45 mm
- Windbreak cloth
- Wall studs 22×145 mm cc 600
- Mineral wool insulation 145 mm
- Board material depending on conditions
- Diffusion barrier (not wet rooms)
- Horizontal joists 45×45 mm cc 600
- Mineral wool insulation 45 mm
- Inner panel 15 mm
- Oak laminate flooring (other floors available as an option)
- Tuplex underlay with diffusion barrier 3 mm
- Particleboard / Floor OSB 22 mm
- Joist 22×245 mm 600
- Mineral wool insulation 245 mm
- Cembrit board 4 mm
- Clinker gray 30×30 with gray joint
- Fix
- Sealing layer
- Floating packer with reinforcing mesh
- Particleboard / OSB flooring 22 mm
- Joist 45×220 mm cc 300
- Mineral wool insulation 220 mm
- Cembrit board 4 mm
- Oak laminate flooring (other floors available as an option)
- Underlay 3 mm
- Particleboard 22 mm
- Joist 45×95 mm cc 300
- Inner roof 15 mm
- Inner panel 15 mm
- Studs 45×145 mm
- Insulation 145 mm
- Inner panel 15 mm
- Inner panel 15 mm
- Rule frame 45×95 mm cc 450
- Mineral wool insulation 95 mm
- Short piece for fastening 45 mm
- Fermacell / wet room plaster 12 mm
- Sealing layer
- Fix
- Tile white glossy 25×40 with light gray grout